This article applies to Aiwyn Practice.
Find out why a draft invoice isn't what you expected and fix it, so the invoice is right before it goes to review or to your client.
Before you start
- You can open Draft Invoices in the left sidebar. See Draft invoice approval permissions reference.
- For what each tab, column and total on a draft means, see Draft invoice screen reference.
- If the problem is in the WIP grid rather than on a draft, see Troubleshoot unexpected WIP.
Steps
Find the symptom that matches what you see, then work through its checks in order. The quickest checks come first.
You can't find a draft in the list
- Select Draft Invoices in the left sidebar.
- In Filter By Staff, select the staff member the draft belongs to or filter to All Staff.
- Select the tab for the draft's status, such as In Progress or Pending Review. Associated to Staff and Assigned to Staff filter by who the draft is linked to, not by status.
- In Search, type the client name or project name, the screen will update as you type
- If the draft still isn't there, check the Invoices module. A sent invoice moves there with a status of Unpaid.
- If it isn't in Invoices either, select WIP in the left sidebar, find the project and check Current Draft Invoice. If no draft is shown and the work is still unbilled, the draft may have been deleted and its work returned to WIP.
The draft appears in the list, or you know it was sent or deleted. For more ways to narrow the list, see Work with the draft invoices list.
A draft Auto Generate should have created isn't there
- In Draft Invoices, filter the Created By column to Auto Generated.
- Go to Settings → Billing → Auto Generate and check the Default auto generate day. Auto Generate runs at 12:00 pm ET on that day, once a month.
- On the Project table, check the project's Billing Schedule. A job set to Manual isn't auto generated.
- Check that the project has an amount to bill, such as a fixed fee amount or unbilled WIP.
- Check whether the project is already on an unreconciled draft. Auto Generate doesn't add a project to a draft that already exists.
- Check whether the client already has an auto generated draft this month. Auto Generate creates one draft per client per month, with every eligible job on it.
If a project fails a check, correct it before the next run, or create the draft yourself. See Create, schedule and delete draft invoices.
Time or expenses are missing from the draft
A draft holds only the work that was unbilled up to its Unbilled as of date, on the projects selected when it was created.
- Open the draft and select the Time tab. To check expenses, select the Expenses tab.
- Check the Unbilled as of date. Work after that date isn't on the draft.
- Check that the project is on the draft. Only the projects you selected in the Projects table of the Create Invoice modal are included.
- Check whether the entry was left off the draft. Work left off stays in WIP.
- Select WIP in the left sidebar and find the project.
- Check Current Draft Invoice. If another draft exists for the project, the work may be on that draft.
- If the work isn't in WIP at all, it hasn't been approved, isn't billable, or was already billed. See Troubleshoot unexpected WIP.
Once the work is in WIP and inside the draft's cutoff, you can add it to the draft. See Create or add to a draft invoice from WIP.
Realization is lower than you expected
Realization is Invoice Amount divided by WIP Value, so a low figure means the draft bills less than the work on it was worth.
- Open the draft.
- Compare Invoice Amount with WIP Value.
- Select the Time tab and check Write Up/Down and Time Realization. A negative Write Up/Down means amounts were lowered on this draft.
- Select the Expenses tab and check Write Up/Down and Expense Realization.
- Check the amounts at project, staff and entry level, and correct any amount that was lowered by mistake. See Edit a draft invoice.
- Check whether progress was applied to the draft. Applied progress lowers Invoice Amount, because part of the work was billed earlier.
- Check that no work was left off the draft by mistake.
- Check that the draft holds the projects you meant to bill. If the wrong projects were selected, the mix of work is wrong rather than the amounts.
Write Up/Down and Realization now reflect only the adjustments you intended. An engagement billed at an agreed flat fee often realizes below 100%, and that isn't an error. See How realization is calculated.
You can't edit the draft
- Open the draft and check its status.
- If the status isn't In Progress, ask the reviewer to return the draft. A returned draft goes back to In Progress. See Move a draft invoice through review.
- To change a time amount, select the Time tab. Time entries can't be added or changed in Invoice Preview.
- To change an expense amount, select the Expenses tab. In Invoice Preview, you can change expense descriptions only.
- If an amount won't save, check that it isn't negative. You can't enter a negative amount for time or expenses.
- If you still can't edit, ask your firm administrator to check your permissions.
You can make the change. For the steps, see Edit a draft invoice.
A custom fee change in Settings isn't on the draft
A custom fee is added to a draft when the draft is created, so later changes in Settings → Billing → Custom Fees don't reach it.
- Open the draft.
- Find the fee in the Taxes and Other Fees section.
- To correct the fee on this invoice only, edit its name or amount, or turn it off.
- To apply the Settings change instead, delete the draft and create it again. See Create, schedule and delete draft invoices.
The draft shows the fee you expect. For how fees are applied, see How custom fees are added to invoices.
The invoice preview doesn't look right
- Open the draft and select Invoice Preview.
- Select Generate Preview. The PDF preview doesn't build until you select it.
- If a line item note is missing, select the three-dot menu at the end of the line, select Add a Note, and type the note again. Notes can be removed when line items are regrouped.
- If notes show in Invoice Preview but not on the PDF, ask your firm administrator to update the invoice template with the latest blocks from the Aiwyn managed template. See Manage invoice templates.
- If expenses don't appear the way you expect, choose an Expense display option: Single Line Summary, Itemized or Hide Expenses. The Expenses section is hidden when the draft has no expenses.
- If the attached time entry pages look cramped or columns are cut off, switch the orientation to Landscape.
- The invoice preview will refresh automatically after any change is made.
The preview shows your current wording, notes and expense layout. The logo, columns and footer come from the invoice template, not the draft. See Invoice templates control appearance, not draft content.
The draft is flagged Errors found
Errors found means the draft has validation issues that must be resolved before it can move on.
- Select Draft Invoices in the left sidebar.
- Select the Errors found tab.
- Select the draft to open it.
- Find the error on the draft.
- Fix the cause the error names.
- Check the draft's status.
- If you can't tell what the error is, contact Aiwyn Support with the client name and draft ID.
The draft leaves the Errors found tab and can move on through review. For what you can do at each status, see Draft invoice status and available actions reference.
Deleting a draft or leaving work off doesn't write anything off. The work returns to WIP and can be billed later. To stop work from ever being billed, see Write down or write off unbilled work.
Use Return rather than Delete when a draft needs correcting. Return sends the draft back to In Progress. Delete discards it. See What happens when a draft invoice is returned or deleted.
Changing the Invoice Date doesn't change which time or expenses are on the draft. The Unbilled as of date decides that.
Don't delete or recreate a draft flagged Errors found before you know the cause.
Related
- Work with the draft invoices list
- Edit a draft invoice
- Create or add to a draft invoice from WIP
- Create, schedule and delete draft invoices
- Move a draft invoice through review
- Troubleshoot unexpected WIP
- Write down or write off unbilled work
- How realization is calculated
- What happens when a draft invoice is returned or deleted
- How custom fees are added to invoices
- Invoice templates control appearance
- Draft invoice screen reference
- Draft invoice status and available actions reference
- Draft invoice approval permissions reference
- Manage invoice templates